Errata

IF Leão, N Araújo, CK Scotti, RFL Mondelli, MM de Amoêdo Campos Velo, JFS Bombonatti; The Potential of a Bioactive, Pre-reacted, Glass-Ionomer Filler Resin Composite to Inhibit the Demineralization of Enamel in Vitro. Oper Dent 1 January 2021 46 (1): E11–E20. doi: https://doi.org/10.2341/19-151-L

There are errors in the Author contact list. The correct author and author affiliations list should read (corrections are underlined):

IF Leão; NA Oliveira; CK Scotti; RFL Mondelli; MMAC Velo; JFS Bombonatti

Isabela Furlaneto Leão, MSc, PhD student, Department of Operative Dentistry, Endodontics and Dental Materials, Bauru School of Dentistry, University of São Paulo, São Paulo, Brazil

Naiara Araújo de Oliveira, MSc, PhD student, Department of Operative Dentistry, Endodontics and Dental Materials, Bauru School of Dentistry, University of São Paulo, São Paulo, Brazil

Cassiana Koch Scotti, MSc, PhD student, Department of Operative Dentistry, Endodontics and Dental Materials, Bauru School of Dentistry, University of São Paulo, São Paulo, Brazil

Rafael Francisco Lia Mondelli, DDS, MS, PhD, Full Professor, Department of Operative Dentistry, Endodontic and Dental Materials, Bauru School of Dentistry, University of São Paulo,São Paulo, Brazil

Marilia Mattar de Amoêdo Campos Velo, DDS, PhD, Postdoctoral researcher, Professor, Department of Operative Dentistry, Endodontics and Dental Materials, Bauru School of Dentistry, University of São Paulo, São Paulo, Brazil

^*Juliana Fraga Soares Bombonatti, DDS, MS, PhD, Associate Professor, Department of Operative Dentistry, Endodontic and Dental Materials, Bauru School of Dentistry, University of São Paulo, São Paulo, Brazil

^*Corresponding author: Alameda Octávio Pinheiro Brisolla 9–75, Bauru-SP-17012-901, Brazil; e-mail: julianafraga@usp.br

DM De Paula, AD Loguercio, A Reis, S Sauro, AH Alves, PR Picanço, K Yoshihara, VP Feitosa; Lack of Neutralization of 10-MDP Primers by Zirconia May Affect the Degree of Conversion of Dual-cure Resin Cement. Oper Dent 1 January 2021 46 (1) 107–115. doi: https://doi.org/10.2341/18-189-L

There are errors in the author affiliation list. The correct the author affiliation should read (corrections are underlined):

Diego M De Paula, DDS, MSc, Post-graduate program in dentistry, Department of Restorative Dentistry, Federal University of Ceará, Fortaleza, Brazil; Paulo Picanço School of Dentistry, Fortaleza, Brazil

Alessandro Loguercio, DDS, PhD, State University of Ponta Grossa, Ponta Grossa, Paraná, Brazil

Alessandra Reis, DDS, PhD, State University of Ponta Grossa, Ponta Grossa, Paraná, Brazil

Salvatore Sauro, DDS, University of CEU-Cardenal Herrera, Dental Biomaterials and Minimally Invasive Dentistry, Department of Dentistry, Faculty of Sciences and Health, Valencia, Spain; & Department of Therapeutic Dentistry, I.M. Sechenov First Moscow State Medical University, Moscow, Russia

Adyson H Alves, DDS, MSc student, Paulo Picanço School of Dentistry, Fortaleza, Brazil

Paulo R Picanço, DDS, MSc, PhD, Paulo Picanço School of Dentistry, Fortaleza, Brazil

Kumiko Yoshihara, National Institute of Advanced Industrial Science and Technology (AIST), Health and Medical Research Institute, Kagawa, Japan; & Okayama University, Graduate School of Medicine, Dentistry and Pharmaceutical Sciences, Department of Pathology & Experimental Medicine, Okayama, Japan

^*Victor P Feitosa, DDS, MsC, PhD, professor, Post-graduate program in dentistry, Department of Restorative Dentistry, Federal University of Ceará, Fortaleza, Brazil; Paulo Picanço School of Dentistry, Fortaleza, Brazil

^*Corresponding author: Department of Restorative Dentistry, Dental School - Federal University of Ceará, Rua Monsenhor Furtado S/N, Bairro Rodolfo Teofilo, 60430-325 Fortaleza, CE, Brazil; e-mail: victorpfeitosa@hotmail.com or victor.feitosa@facpp.edu.br

F Ozer, O Irmak, O Yakymiv, A Mohammed, R Pande, N Saleh, M Blatz; Three-year Clinical Performance of Two Giomer Restorative Materials in Restorations. Oper Dent 1 January 2021 46 (1) E60–E67. doi: https://doi.org/10.2341/17-353-C

There are errors in the corresponding author information. The corresponding author information should read (corrections are underlined):

^*Ozgur Irmak, DDS, PhD, Department of Restorative Dentistry, Faculty of Dentistry, Yakın Doğu University, Lefkoşa, Turkey

^*Corresponding author: Yakın Doğu Üniversitesi, Diş Hekimliği Fakültesi, Restoratif Diş Tedavisi Anabilim Dalı Kliniği, Yakın Doğu Bulvarı, 99138 Lefkoşa, KKTC Mersin-10, Turkey

IBL Soares-Rusu, CA Villavicencio-Espinoza, NA de Oliveira, L Wang, HM Honório, JH Rubo, PAS Francisconi, AFS Borges; Clinical Evaluation of Lithium Disilicate Veneers Manufactured by CAD/CAM Compared with Heat-pressed Methods: Randomized Controlled Clinical Trial. Oper Dent 1 January 2021 46 (1) 4–14. doi: https://doi.org/10.2341/19-233-C

There are errors in the corresponding author information and in paragraph 1 under Treatment Planning and Tooth Preparation in the Methods and Materials section (p6), and in the legend for Figure 10 (p11). They should read (corrections are underlined):

Idiane Bianca Lima Soares-Rusu, DDS, MSc, PhD, Bauru School of Dentistry, University of São Paulo, Department of Operative Dentistry, Endodontics and Dental Materials, Bauru, São Paulo, Brazil

Carlos Andres Villavicencio-Espinoza, DDS, MSc, PhD, Bauru School of Dentistry, University of São Paulo, Department of Operative Dentistry, Endodontics and Dental Materials, Bauru, São Paulo, Brazil

Naiara Araújo de Oliveira, DDS, MSc, PhD, Bauru School of Dentistry, University of São Paulo, Department of Operative Dentistry, Endodontics and Dental Materials, Bauru, São Paulo, Brazil

Linda Wang, DDS, MSc, PhD, professor, Bauru School of Dentistry, University of São Paulo, Department of Operative Dentistry, Endodontics and Dental Materials, Bauru, São Paulo, Brazil

Heitor Marques Honório, DDS, MSc, PhD, associate professor, Bauru School of Dentistry, University of São Paulo, Pediatric Dentistry, Orthodontics and Public Health, Bauru, São Paulo, Brazil

Jose Henrique Rubo, DDS, MSc, PhD, professor, Bauru School of Dentistry, University of São Paulo, Department of Periodontics and Prosthesis, Bauru, São Paulo, Brazil

Paulo Afonso Silveira Francisconi, DDS, MSc, PhD, professor, University of São Paulo, Department of Operative Dentistry, Endodontics and Dental Materials, Bauru, São Paulo, Brazil

^*Ana Flávia S Borges, DDS, MSc, PhD, associate professor, University of São Paulo, Department of Operative Dentistry, Endodontics and Dental Materials, Bauru, São Paulo, Brazil

Digital smile design was performed using Apple's Keynote Software to obtain veneer proportions and to enable communication and increase predictability. Standardized extraoral photographs were taken with a Nikon D5300 digital reflex camera using the following parameters: manual mode 1/125, f22, and ISO 125, coupled with Sigma Macro 105mm DX lens; twin manual 1/1 flash (Nikon R1C1 Wireless Close-UP Speedlight System) equipped with Watson CR123A Rechargeable Lithium Battery (3V, 400mAh); and a flash holder (Agno`s, Italy). The analysis of the face thirds was made according to the participant's smile. Initial impressions were taken using a heavy and light condensation silicone (Xantopren/Optosil, Heraeus Kulzer, Germany) onestep technique. The study casts were obtained, and the wax-up was performed according to digital planning.

Figure 10. Means and standard deviation of the manufacturing process at the study periods (baseline, 6 months, and 12 months of follow-up) for the topics marginal adaptation (MARA), marginal discoloration (MARD), restoration fracture (RESF), and postoperative sensitivity (POSTS).